Zeitview Pilot 9.2.3

version 9.2.3

May 16, 2023
Version 9.2.3
- fixed pausing after battery swap

version 9.2.2

Apr 28, 2023
Version 9.2.2
- general bug fixes & improvements

version 9.2.1

Mar 28, 2023
Version 9.2.1
- general bug fixes & improvements

version 9.2

Feb 7, 2023
Version 9.2
Check out the new and improved experiences with access to Zeitview network missions and self-serviced automated flight capabilities.

version 8.3

Jan 25, 2022 Version 8.3
- Fixed an issue where multiple pilot check-ins were being recorded when the device re-establishes connection after checking in while in offline mode
- Fixed an issue where pilot depart time was not being logged if the device re-established connection after departing the mission location
- Fixed an issue where the obstacle detection modal was not appearing after the drone paused due to obstacle detection
- Missions with multiple automated mapping shots are now supported by the DroneBase Pilot App
- Improved the map zoom behavior on the Plan & Fly screen
- Improved map view
- Improved shot menu behavior

version 8.2

Dec 13, 2021 Version 8.2
- Updated to DJI SDK 4.15.1
- Custom corner radius can be specified for each corner on an automated flight plan for applicable missions
- Added a warning notification for missions where waypoints are too close in proximity to one another or if a corner radius is too tight to fly
- Improved the UI around selecting shots and shot menu
- Improved reliability around creating Sites with poor connectivity
- Support for recurring flights for applicable missions
- Improved reliability around the recording of pilot arrival times
- Fixed an issue where multiple pilot check in times were recorded during situations with little to no connectivity

version 8.1

Oct 6, 2021 Version 8.1
- Fixed an issue where images were missed during a 360 panorama on the Phantom 4 Pro V2.0 drone
- Fixed an issue where the gimbal would rotate incorrectly during an orbit flight
- Fixed an issue where the drone would not proceed to the next automated shot if waypoints were too close or if the corner radius was too tight
- Fixed an issue where certain sites would not appear on the map

version 8.0

Sep 20, 2021 Version 8.0
- For automated flights containing multiple shots, you can now select which shots you would like to fly using the shot list feature. The shot list feature will also show which shots are required for a reshoot and which are not
- Bug fixes and stability improvements

version 7.3.1

Aug 5, 2021 Version 7.3.1
- Fixed an issue where automated flight plans would not proceed due to the flight plan containing a corner radius that was too tight to be flown
- Fixed an issue where certain missions containing a single automated mapping flight would not display the flight plan correctly and would not allow the drone to take off

version 7.2.18

Jul 29, 2021 Version 7.2.18
- Added the ability to perform an automated orbit video flight for relevant missions
- Flight plan geometry for automated flights can now be adjusted via the new "edit" button in the settings menu
- Improved flight path UI and visibility for automated flights

version 7.1.8

Jun 24, 2021 Version 7.1.8
- Fixed an issue where the drone would resume an automated flight from the start instead of where it was paused or where a battery swap was initiated
- Fixed an issue where the resume/launch flight button would occasionally appear inactive after a drone has returned home during 360 Pano mission battery swap
- Improved flight logging for diagnostics

version 7.1

May 14, 2021 Version 7.1
- Fixed an issue where revert button on the flight plan screen would always be present even though there were not any edits to revert
- Fixed an issue where images that were captured during an app crash or low signal were not being correctly sorted during upload
- Fixed an issue that was causing the post flight coverage check to be slow and unresponsive
- Increased the tap area for selecting 360 panorama pins so that it is now easier to tap

version 7.0

Apr 21, 2021 Version 7.0
- Added additional automated flight capabilities only applicable for certain automated DroneBase missions
- The review image flow at the end of an automated mission now supports multiple automated flights
- The auto assign upload feature now works with automated missions
- Fixed an issue where the low battery warning does not appear before the drone initiates a low battery RTH during an automated flight
- Fixed an issue where the obstacle avoidance detected popup was appearing at the end of a flight
- Removed duplicate services prompts within the app

version 5.2

Jan 20, 2021 Version 5.2
- Improved address input UI in pilot profile
- Increased the drone speed when traveling from home point to start point of automated orthomosaic mission
- Added support for missions that require multiple automated orthomosaic flights (only applicable to certain DroneBase missions)
- Fixed an issue where automated pano missions were reverting to default positions when resuming a flight with customized positions
- Fixed an issue where automated flight would be paused if the app were to crash or be force closed
- Fixed an issue where the map would be zoomed in to the incorrect position when re-entering the flight screen for an automated orthomosaic flight
- Fixed an issue where pilots were unable to take off after dismissing the slide to take off prompt and leaving and re-entering the flight screen

version 5.1

Dec 15, 2020 Version 5.1
- Added a max radius warning that will appear when attempting to start an automated flight plan that exceeds the maximum radius set in DJI GO4
- Added a max altitude setting that will appear when attempting to start an automated flight plan that requires an altitude that is higher than the max altitude set in DJI GO4
- You can now add your drone insurance information in the pilot profile section
- Fixed an issue where the camera hud was not appearing correctly for iPhone 11 running iOS 14.1
- Fixed an issue where Mavic 2 users would get a black screen when connecting the phone after the drone and controller are connected and powered on
- Optimized the review coverage tool for iPad pro and iPad air resolutions
- Fixed an issue where the drone would only allow the last panorama to be re-flown when attempting to cancel and re-fly a mission
- Fixed an issue where switching between drones with different image ratio settings caused the flight plan to capture inaccurately

version 5.0

Nov 21, 2020 Version 5.0
- You can now use the DroneBase Pilot app to perform automated panorama flights for select missions
- Fixed an issue where tapping the home button on payout account page caused the app to freeze

version 4.8.4

Sep 30, 2020 Version 4.8.4
- Fixed an issue where the camera HUD was not displaying properly on devices running iOS14.

version 4.8

Sep 16, 2020 Version 4.8
- Change payment processor from Qwil to Stripe
- Added the crosshatch flight pattern to automated flight feature (only available for select missions)
- iPad and iPhone UI fixes and improvements
- Updated DJI SDK to 4.13.1
- Fixed a bug with overlapping text on menus for smaller iPhone 6/7/8
- Fixed an issue where flight screen rotates to portrait mode and causes the app to freeze
- Added a gimbal angle indicator to bottom telemetry bar
- Fixed an issue where the flight plan would appear obstructed when entering the automated flight screen
- Fixed an issue where gimbal angle slider in FPV does not slide all the way up

version 4.7.9

Sep 1, 2020 Version 4.7.9
- Fixed an issue where shot attributes were not updating properly within the automated flight app

version 4.7

Aug 28, 2020 Version 4.7
- You can use gimbal angle adjustments outside of 90* for certain automated mapping missions
- The mission details page will now be cached so that it is accessible even without internet connection
- The arrive/depart feature will now work and accurately capture your arrival and departure time even without internet connection
- The unit of measure for drone speed in the automated flight menu will now be shown as MPH when set to imperial in the unit switcher menu
- Improved obstacle avoidance calibrations during takeoff for automated flight
- You will now be asked to perform an image GPS scan if signal interference is detected during an automated flight to ensure that the drone resumes the automated flight at the correct position
- You can now specify a starting way point for an automated flight
- Fixed a UI issue where the arrive/depart prompt was not appearing centered
- Fixed an issue where the background on the auto-upload flight log screen appeared stretched
- Fixed an issue where the drone would sometimes resume an automated flight plan incorrectly or on a diagonal line
- Fixed an issue where the app would crash when switching the mobile device to/from airplane mode
- Fixed an issue where the low signal warning would appear twice
- Fixed an issue where the shutter button was appearing incorrectly on the manual flight screen
- Fixed an issue where duplicate thumbnails would appear on the upload screen and prevent the user from uploading
- Fixed an issue where the asset preview screen for manual flights was appearing incorrectly

version 4.6.5

Aug 7, 2020 Version 4.6.5
- Fixed an issue where certain shots were not appearing on the flight screen

version 4.6.4

Jun 28, 2020 Version 4.6.4
- Fixed an issue where the flight plan was not showing the correct flight path based on the image ratio set in the recommended camera settings
- Fixed an issue where ortho settings battery estimates were sometimes inaccurate
- Fixed an issue where auto camera mode could not be set if the user entered the flight screen in video mode
- Fixed an issue where the automated flight plan would not start if the drone speed was set to 1 m/s
- Fixed an issue where the automated flight review flow would not appear if the app crashes during RTH
- Fixed an issue where the automated flight settings were not being implemented if the pilot makes changes after cancelling the confirm take off prompt
- Fixed an issue where the flight status indicator was displaying the incorrect status during a reshoot

version 4.6.2

Jun 19, 2020 Version 4.6.2
- Fixed an issue where flight plan settings were not saving and applied if drone was plugged in after the settings were set
- Fixed an issue where user was not being taken back to the flight screen if the app were reopened mid-flight in Offline Mode
- Fixed an issue where Phantom drones appeared to not be capturing any images on the automated flight screen
- Fixed an issue where the Phantom 4 Pro would take long pauses just before a turn during an automated flight
- Fixed an issue where automated flight screen would freeze when rotated to portrait mode while reopening the app
- Fixed an issue where offline map download would pause and could not be resumed if app is closed during the download
- Fixed an issue where the offline map download prompt would appear incorrectly, if a user initiated a download in landscape mode
- Fixed an issue where the user was unable to cancel an existing partial flight plan and start a new one
- Fixed an issue where the FPV view would freeze when the user would perform an SD card scan to review image positions
- Fixed an issue where camera type was appearing blank when the user would power on and establish a connection between the controller and drone before entering the fly screen

version 4.6

May 29, 2020 Version 4.6
- Introducing Offline mode, you can now execute an automated mission without cellular connection. This feature is only available to automated flight missions.
- Fixed an issue where pilots were unable to check-in to a mission that has been rescheduled
- Fixed an issue where automated flight plan estimates appeared inaccurate when a drone was not plugged in

version 4.5

May 22, 2020 Version 4.5
- Adjusted the max speed settings for Mavic 2 Pro drones for better optimization and efficiency during automated flights
- You can now scan your SD card during the review coverage flow if your coverage does not meet mission requirements
- Fixed an issue where adjusted flight speed was not saving when user leaves the automated flight screen and returns
- Fixed an issue where revert to original button wasn't appearing on certain edits to the polygon
- Fixed an issue where automated flight plan would be reset if the flight resume button was used instead of the RTH cancel button during RTH
- Fixed an issue where GPS markers do not remain on screen after the review coverage flow

version 4.4.1

Apr 27, 2020 Version 4.4.1
- Fixed an issue where pilots were unable to use the ‘depart’ feature
- Fixed an issue where pilots were momentarily unable to see the battery % while certain flight statuses were being displayed
- Fixed an issue where pilots were unable to stop the interval camera mode after starting it
- Fixed an issue where text was appearing truncated in the review coverage message

version 4.4

Apr 10, 2020 Version 4.4
- You can now sync your AirData account so that all your future flight logs will be automatically updated to AirData after each flight
- You will now receive a warning message if you encounter poor signal when trying to resume an automated flight
- The max speed setting is now dynamically capped depending on the altitude of your flight plan
- The pilot check-in feature has been updated so that it occupies less room at the top of the screen
- The estimated flight time/timer accuracy has been improved
- The method in which the drone turns during automated missions has been adjusted to speed up and improve mapping mission capture
- The shutter noise can now be adjusted via volume buttons
- Improved iPad UI and fixed iPad related UI bugs
- Fixed an issue where pilots were able to adjust the mission outline/polygon on non automated flight missions
- Fixed an issue where pilots were able to see an automated flight plan on non automated flight missions

version 4.3

Mar 20, 2020 Version 4.3
* Improved image capture overlap accuracy and consistency across phantom and mavic series drones
* Improved warning messages and sensitivity around obstacle avoidance
* Improved the responsiveness of adjustment nodes for polygon/flight plan for relevant missions
* If the app crashes during an automated flight it will now resume on the flight screen when reopened
* Fixed the polygon flickering issue that would occur over the map
* Fixed an issue where the pilot would have to exit and return to flight screen to reestablish connection to a phantom drone after a battery swap
* Fixed an issue where Mavic 2 users had to tap confirm twice when resuming an automated flight after a battery swap

version 4.2

Feb 18, 2020 Version 4.2
* Improved flight path optimization
* There will now be a shutter noise when taking images during an automated flight
* Flight timer is now represented in minutes and seconds
* Improved the accuracy and responsiveness of H.S and V.S indicators
* You can now access the fly screen without needing a drone connection
* Fixed an issue where the drone could not be manually controlled if flight was paused due to obstacle avoidance without using the mode switcher
* Fixed an issue where RTH could not be cancelled via onscreen button
* Fixed an issue where drone would not start automated flight if there was a forward/backward obstacle detected upon takeoff
* Fixed an issue where information would be occasionally truncated in the bottom indicators
* Fixed an issue where app would crash after attempting to resume an automated flight after switching flight modes during a flight
* Fixed an issue where the battery change warning message did not appear immediately when RTH was triggered for low battery/battery change required
* Fixed an issue where the flight plan would be cancelled if a user finishes an ortho and leaves the fly screen
* Fixed an issue where pilots were unable to select Ground Photos shot from the shotlist when they first open the ground photos screen
* Fixed an issue where tapping on the mini camera feed would not switch the view mode unless you tapped the icon directly

version 1.1.1

version 4.2

2020年2月18日 Version 4.2
* Improved flight path optimization
* There will now be a shutter noise when taking images during an automated flight
* Flight timer is now represented in minutes and seconds
* Improved the accuracy and responsiveness of H.S and V.S indicators
* You can now access the fly screen without needing a drone connection
* Fixed an issue where the drone could not be manually controlled if flight was paused due to obstacle avoidance without using the mode switcher
* Fixed an issue where RTH could not be cancelled via onscreen button
* Fixed an issue where drone would not start automated flight if there was a forward/backward obstacle detected upon takeoff
* Fixed an issue where information would be occasionally truncated in the bottom indicators
* Fixed an issue where app would crash after attempting to resume an automated flight after switching flight modes during a flight
* Fixed an issue where the battery change warning message did not appear immediately when RTH was triggered for low battery/battery change required
* Fixed an issue where the flight plan would be cancelled if a user finishes an ortho and leaves the fly screen
* Fixed an issue where pilots were unable to select Ground Photos shot from the shotlist when they first open the ground photos screen
* Fixed an issue where tapping on the mini camera feed would not switch the view mode unless you tapped the icon directly

version 4.6.5

7 серп 2020 р. Version 4.6.5
- Fixed an issue where certain shots were not appearing on the flight screen

version 5.1

2020年12月15日 Version 5.1
- Added a max radius warning that will appear when attempting to start an automated flight plan that exceeds the maximum radius set in DJI GO4
- Added a max altitude setting that will appear when attempting to start an automated flight plan that requires an altitude that is higher than the max altitude set in DJI GO4
- You can now add your drone insurance information in the pilot profile section
- Fixed an issue where the camera hud was not appearing correctly for iPhone 11 running iOS 14.1
- Fixed an issue where Mavic 2 users would get a black screen when connecting the phone after the drone and controller are connected and powered on
- Optimized the review coverage tool for iPad pro and iPad air resolutions
- Fixed an issue where the drone would only allow the last panorama to be re-flown when attempting to cancel and re-fly a mission
- Fixed an issue where switching between drones with different image ratio settings caused the flight plan to capture inaccurately